Been following that Kris Barton at Full Throttle Rc and they are building all of their Mamba's push/pull with still using the falcon spinner on most. I've seen a few with tru-turns on them and the batts are are right beside the tank so I figure I'll be set. I actually have a lightened 5" back plate already so if the solid one is too much nose weight I could swap it out. I'm hoping to start the build over the holidays. I've got another project on the table that I am having trouble finishing, lack of motivation.....

Quote Originally Posted by tbrum View Post
Awesome Dean!!!

Good call on the spinner - I think 5” would be better. There is a spot for the rudder in the tail on push/pull. You will definitely need a heavier tru-turn spinner and I’m guessing batts up forward of tank on the tank tray should work out perfectly.

Please post pics once you get into it !