0
![Not allowed!](images/buttons/up_dis.png)
Thumbs Up |
Received: 987 Given: 745 |
Ha! Looks like one of those 20L water bottles for a fuel tank!!!
BVM UAT and BVM smoke pump installed up in the nose.
Visit my website:www.bbtbuildservices.blogspot.com
Thumbs Up |
Received: 987 Given: 745 |
Powerbox Royal and 2 x 24D Powerbox receivers for Sandro’s Core...
The BVM Central Control Unit is pretty slick. Lights / gear-door + sequencer / airbrakes / wheel brakes all managed through this unit. Awesome
Thumbs Up |
Received: 987 Given: 745 |
And got the JetCat300 Pro installed. Just barely fits LOL
Thumbs Up |
Received: 11 Given: 1 |
So is it done yet?
Thumbs Up |
Received: 0 Given: 0 |
LOL what Eric said !!!!!![]()
Thumbs Up |
Received: 987 Given: 745 |
Ha!!! Almost!! Just Core / Royal setup to go!
There’s no manual for this so talked to Rob at BVM
Throws
All 4 wing surfaces move together as elevons
Ailerons - 1.25” U/D measured at the fuse side
Rudder - 2” L/R measured at the base of the fin
Canards - 1.25” U/D measured at the leading edge at the fuse side
All surfaces have 25% percent expo for the first flight
CG
Small hole in opening of hatch (located 104mm forward of gear)
This is a conservative CG
Last edited by tbrum; 02-06-2021 at 03:54 PM.
Thumbs Up |
Received: 987 Given: 745 |
CG...
2 x 2S-5000mAh packs for Rx on front tray
1 x 3S-7000mAh pack for turbine on front tray
Needed to add 11oz on tray to achieve CG
Will remove as required after Sandro flies it!!
Last edited by tbrum; 02-06-2021 at 04:03 PM.
Thumbs Up |
Received: 987 Given: 745 |
Final beauty shot!...
Just radio setup to go!
Thumbs Up |
Received: 6 Given: 1 |
That looks great. Can't wait to see it fly.
There are currently 1 users browsing this thread. (0 members and 1 guests)