5mm spinner screws

[sparky 29]

Ya when you get 50 of them. I don't have a problem finding stuff on there site. Just thought i would share. Look how much m5 spinner bolts are to buy from a hobby shop.

[Dennis P]

Trev,

Which Fastenal?

The one on Argentia/Winston Churchill and the one at Dixie/Eglington won't sell to an Individual you must be buying for a Company.

Are you getting Grade 5 or 8 or SS?

The longest i have at the moment is 110 mm.

Denis I gues you are doing something like a 5" Ultimate shape spinner?

Jim mine is going on a AJ 105" Laser with a DA 120 and a friend needs one for his new AJ Slick with a DA120. The 110mm ones that I ordered from Pro RC will work with enough thread to be safe but I was wanting to order some extras around 125mm so I would have the length to fit most spinners, you can always trim 10mm off but they are hard to stretch another 10mm out of. Take care

[JDaly]

Ya when you get 50 of them. I don't have a problem finding stuff on there site. Just thought i would share. Look how much m5 spinner bolts are to buy from a hobby shop.

Brent,

Just looked quickly as i was on a break at work. Didn't realize they would sell individual.

Appreciate the share as always looking for new sources. Do you use them for work so maybe spend a little more time on the site?

Like i said just a quick 5 minute look for me so maybe if i spend more time it will make more sense. LOL!

[JDaly]

Jim mine is going on a AJ 105" Laser with a DA 120 and a friend needs one for his new AJ Slick with a DA120. The 110mm ones that I ordered from Pro RC will work with enough thread to be safe but I was wanting to order some extras around 125mm so I would have the length to fit most spinners, you can always trim 10mm off but they are hard to stretch another 10mm out of. Take care

Denis so what is the Dia and shape of the spinner. From Lawson they have 110, 120,130, 140, 150 even up to 200mm.

[tbrum]

Jim... the Fastenal I deal with is Harvester and Walkers in Burlington. You must order a min of $25 (easy to do) and they prefer company account but not mandatory. I just made up a company account with my home address. No proof needed.

Jim’s Hobby Shop & Wanker Supplies would work.

Last order I just ordered individual M5. No need to order multiples. I picked up some 4-40 and 6-32 screws to get over
$25.

[Bgelok]

HAHAHA, friggin hilarious.

Jim’s Hobby Shop & Wanker Supplies would work.
.

[JDaly]

Jim... the Fastenal I deal with is Harvester and Walkers in Burlington. You must order a min of $25 (easy to do) and they prefer company account but not mandatory. I just made up a company account with my home address. No proof needed.

Jim’s Hobby Shop & Wanker Supplies would work.

Last order I just ordered individual M5. No need to order multiples. I picked up some 4-40 and 6-32 screws to get over
$25.

Uuuuuummmmmm It's Jim's MOBILE Hobby Shop & Wicked Supplies you PH*CKER!

With the Eglington store I just Use the Company I work for name and pay with my own credit card.

Yeah sure a lot nicer paying $7.95 for 100 4-40 x 5/8" instead of $4.95 for 4. LOL!

[JDaly]

HAHAHA, friggin hilarious.

Bite Me! Your a PH*CKER TOO!

[Flyin High]

Bite Me! Your a PH*CKER TOO!

*you’re