93” “laser” 230 reflex scheme

[tbrum]

Nice Brodie.. spinner gap looks much better!! LOL

[Bhughes]

I will be the first to admit it Trevor I’m lazy when it comes to assembling a plane lol. Finished it today no real surprises except there were no cotter pins for the axles. But I had spares I borrowed from work... add some stickers and some servo wire covering since I had some from a garage sale. And yellow and blue to boot. Maiden soon I hope. It’s at the tail heavy end of where Andrew suggests. I do like the jeti switches for these planes so nothing in the fuse except fuel dot ign light and jeti light. The 3.5 fly wheelz fit perfect on the axels as well.

[wingburner]

Looks great Brodie, you will love it.....but before you can fly it, you need some sandpaper and clean up your engine cut out !!

[Bhughes]

Lol test fit of cowel in the pic. And mine don’t last that long Jack. I fly a little lower than some.....

[Bgelok]

You got a coupler for me. 90k winds out here last couple days as well.

Pssst....wind doesn’t matter when you have a gyro. LMFAO

[Cosmith]

I'll be interested to hear how you like the balance Brodie. I'm going to run a GP61 one on mine, hoping to put the rudder servo in the rear if I can...hate pull pull.

[Bhughes]

https://youtu.be/Myi3ltXjVzY

Cory I have a three savox 2274 in the tail. I would use a heavier one for the rudder. If you see where I placed everything and it’s slighty nose heavy. Aj says from in front of the tube to about half inch ahead of that. It needs to be in the middle of the wing tube to be neutral balance with the equipment I used. Over all it flys lighter then my old 89” slick with the bigger wings. I like the counter balances on the wings.

[tbrum]

Congrats Brodie! Looks great!

[Cosmith]

https://youtu.be/Myi3ltXjVzY

Cory I have a three savox 2274 in the tail. I would use a heavier one for the rudder. If you see where I placed everything and it’s slighty nose heavy. Aj says from in front of the tube to about half inch ahead of that. It needs to be in the middle of the wing tube to be neutral balance with the equipment I used. Over all it flys lighter then my old 89” slick with the bigger wings. I like the counter balances on the wings.

Great, thanks Brodie. I'm doing a GP61 on muffler with MKS HV777a+. If your's is a bit nose heavy I might still get away with push-pull rudder.

Nice flight by the way! I'm excited to get mine going.

[Bhughes]

Cory if you want to do a canister I found amr has the eme canisters in stock. The headers suck but the cans rock. And one of the mount in the kit fits perfect. I used a solid 50mm header as well.