Quote Originally Posted by Myzee View Post
If it's ok, Id like to ask you a question about your F-15.
Elevator servos---I see there are holes in the wood inside the elevator access area. Are these blind nuts to mount the servos?
I have absolutely no instructions with mine and can't find a manual so I hope you don't mind me asking some questions!
Myles,

Unfortunatly no blind nuts. I would move the servo just a bit and use fresh wood. The kit comes with a hole pile of good wood screws. I marked the holes and some small pilot holes, then used the wood screw to make the hole. THen dropped some CA down the hole. They held in VERY strong. The elevators were ripped off in the crash and the servo's were still in there solid.