0
Just putting a placeholder here, since it seem like there are lots that are using the Aura.
Please post your .afc files here with a description of how you have it hooked up, I'm sure it'll help others.
This config below is for the Yak 54
2 aileron servos
2 Elevator Servos
1 Rudder Servo
1 Throttle
1 IBEC
This config goes through a power distribution board and uses SBUS, btw, this config file will work with Futaba SBUS as well, you just have to remap and tell the Aura which channel the inputs are for Elevator, Rudder, and Aileron.
For this config, the throttle is direct to the Receiver through the Power Box, Same with the IBEC.
Receiver SBUS -> Aura8 -> Power Distribution -> Servos
Hints and tips on setting up your plane.
Use live monitoring to ensure that each channel is "Zero'd", you can either use the PWM center point on your TX or if you're using SBUS, put the jumper on S3 and use Quick Trims to Zero things out on the Aura8.
For every change made, you must click "Write all to Aura".
Sub trims on the config tool only take effect when you "Write all to Aura"
From here, you can continue with the configuration.
Please feel free to ask any questions. Attached is the preliminary file for the Aura, I'll be adding dual rates and exponential to this file and will versionize the attachments.
This version contains dual rates and expo in the configuration.
Reply With Quote