0
![Not allowed!](images/buttons/up_dis.png)
Thumbs Up |
Received: 987 Given: 745 |
Got into this project tonight! Designed for DA150 so the GP176evo should be insane!!
Crazy cool design! All servos are placed at the center of the plane (at wingtube).
* 2 servos ganged together drives long CF pushrod to elevator bellcrank
* 2 servos ganged together for pull pull for rudder
* 2 servos at each wing root ganged together
Tons of CF
Nice canister tunnel
Seams finished and painted
Cool strips on LE of ailerons
Last edited by tbrum; 11-08-2020 at 09:55 PM.
Visit my website:www.bbtbuildservices.blogspot.com
Thumbs Up |
Received: 987 Given: 745 |
First step tonight was to make up the proper thickness of hardwood donut stand-off.
The standoff is a piece of birch and a piece of CF laminated plywood.
22mm thick
Will install motor tomorrow.
Thumbs Up |
Received: 987 Given: 745 |
So thankful my wife wanted decorative posts in this house LOL!
After lining up the motor/standoff/spinner to the cowl, I got the stand-off installed with a fillet of Hysol 9462
Thumbs Up |
Received: 987 Given: 745 |
A few pictures of the GP176evo installed!!!
Waiting on MTW exhaust order to arrive at Thunderboltrc.com, so will move on to other things next!
Thumbs Up |
Received: 987 Given: 745 |
Oh ya... forgot to show the LG install. I reeaaaallly like this new design by CompARF... gear is held on with bolts that clamp down CF bars! So instead of breaking the fuse, these CF bars can break. Sorta like the BVM sacrificial flex plates on the Jets
Airman 5” wheels!!
Wheels pants are molded to fit around the gear legs.
Thumbs Up |
Received: 987 Given: 745 |
Tailwheel is a Secraft Titanium unit.
I inserted a hardpoint in the bottom of the rudder to anchor the steering spring
Thumbs Up |
Received: 114 Given: 14 |
Nice Trev.
This for yourself or someone else?
Windy You Ask? Well I have White Caps on my coffee, you be the Judge!
Thumbs Up |
Received: 987 Given: 745 |
None of these are for me Jim... been running my same fleet for years now LOL
Thumbs Up |
Received: 987 Given: 745 |
Reworked the tail wheel steering.
Mockingbird steering shocks and a hardpoint with a CF bracket to get the geometry right.
Thumbs Up |
Received: 987 Given: 745 |
Rudder pull-pull is finished. 2 JR8911’s ganged together.
Hopefully 1800oz-in is enough LOL
Secraft pull-pull hardware from ThunderboltRc
There are currently 1 users browsing this thread. (0 members and 1 guests)