Aura FC8 Reference Library

[R Plante]

I'm looking at running a smart fly so rx to aura to smart fly to servo??

[JoeT]

I'm looking at running a smart fly so rx to aura to smart fly to servo??

I run my aura 8 through a Boomarc power board.

Receiver sbus to Aura8 to BoomaRc 8/24 board.

[R Plante]

I run my aura 8 through a Boomarc power board.

Receiver sbus to Aura8 to BoomaRc 8/24 board.

Just looking for power distribution so yes any brand looking at mini 12 but cheaper is better

[wfield0455]

Just looking for power distribution so yes any brand looking at mini 12 but cheaper is better

Check out servo city's power board. It's about $28 and pretty ideal to power 8 servos connected to an Aura8.

https://www.servocity.com/servo-powe...le-servo-leads

[R Plante]

Check out servo city's power board. It's about $20 and pretty ideal to power 8 servos connected to an Aura8.

Sounds good everything is hv servos tech aero ibec beater plane to learn this gyro thing on

[Bgelok]

Cory, do you have a recent file that you could upload for your Yak 55? I just got into setting up the aura 8 in my 88" Yak 55 and would like to compare your settings to mine and use that as a starting point.

[Cosmith]

Cory, do you have a recent file that you could upload for your Yak 55? I just got into setting up the aura 8 in my 88" Yak 55 and would like to compare your settings to mine and use that as a starting point.

Hey Brad, don't have the Yak anymore but all my monoplane setups are similar. I can get you the setup from my 79" Slick a bit later today!

It's a basic 2 elevator servo, 2 aileron servo, single rudder servo setup with a serial connection.

[JoeT]

Cory, do you have a recent file that you could upload for your Yak 55? I just got into setting up the aura 8 in my 88" Yak 55 and would like to compare your settings to mine and use that as a starting point.

This link here is for a Yak 54 86" wingspan -> http://rccanucks.com/showthread.php?...ll=1#post53987

[Cosmith]

Cory, do you have a recent file that you could upload for your Yak 55? I just got into setting up the aura 8 in my 88" Yak 55 and would like to compare your settings to mine and use that as a starting point.

Found an old file from my 91" 3DHS Yak...here it is. It's using PWM not serial. I would highly recommend a serial connection so you don't need any Y cables and you can do master gain so all 3 flight modes can with or without stabilization.

[Bgelok]

Thank you Gents. Downloaded these files. Will load them up and try them out once i get a field to fly on.