Search:

I have for sale a used Hitec H4 - 4 port DC Charger.

The charger is in good condition, but is used.

It includes an assortment of charging harnesses.

$200 CDN Shipped to anywhere in Canada.
...

No - they are not programmable.

I've been following this very closely for the last few years. This is great news. Based on what is happening in other countries (UK, USA), I expected mandatory testing (or licensing), registration...

I have sale QTY 4 - Hitec HS-5245MG servos.

These have 76oz of torque at 6v

Brand new - $200 shipped to anywhere in Canada.

EMT payment only

22037

Sold

For Sale QTY 2 - Blue Bird BLS-H50B Servos.


These have not been flown - only mounted, and used for testing.


These offer a unique helical gear train, are brushless and very high torque (put...

I have for sale QTY 2 - Hitec HS-755MG "Giant Scale" Servos.


These feature 200oz of torque (@6volts) and are an all metal gear design. These are a larger footprint servo (Hitec Giant Scale...

Sold

I have QTY 2 - Hitec HS-645MGs for sale.


These are used - but work fine. They have some overspray (gray paint) on them, and have spliced long extensions.


Asking $55 CDN for both shipped to...

I have for sale a set of Robart 150HD8E Electric Retracts for sale.


These are rotating gear - used in large scale Corsairs, P40s, Hellcats, etc. (Ziroli, Jerry Bates, etc).


These are used,...

Moving on - Ailerons rough fitted

21666

Aileron servo and linkage rough fitted on other panel

21667

At this point I realized that I have a problem. The fit between the Ailerons, Flaps/Dive Brakes, wing tip, and center section wing ribs is very tight. There is no room for error. Also, the...

View of Flaps/Dive Brakes

21665

With the locations of the 6 wing servos worked out - time to fit the Flaps/Dive Brakes and Ailerons.

Rough fitting the Flaps

21662


21663

Next step is to fit the ailerons and Flaps/Dive Brakes. In order to do this, I need to install the servos for each surface so that I know everything will line up and work.

I'm using MKS HV747s...

After using the magnetic building board system for the last month or so - I've learned a few things:

You need a lot of magnets! You probably need about 100 magnets for your standard fixtures, and...

This guy showed up - he'll be the pilot for the Helldiver. Unfortunately, he has assumed a "project manager" role for this build, and he has been constantly on my back to get this plane done since...

With the wing tips, in place - back to the Ailerons.

Added the ribs (which are CNC'd from TBolt Composite Foam board) brass rod hinge point and CBA Strap Hinges

21400

Hinges were aligned...

I've started working on the Ailerons - I need to layout the Ailerons in order to make sure the fit is correct with the Flaps/Dive Brakes and the center of the wing.

I CNC'd the bottom of the...

Another addition to the shop (received this as a Christmas present)

21205



This is a Byrnes Mini Table sale (with custom 18" table). This is one of the nicest machine tools I've used. ...

At this point, it would be nice to start sheeting the the bottom of the wing. But, in order to do that - I need to figure out the linkages for the ailerons, flaps and dive brakes (while I have...

Ok - I was able to get lots done on the wing over the holidays - here is the first update:

I rough fitted the retracts into wing - this involved sanding clearances on the mounting rails and...

Ok - next is to fit the retracts.

I started by building a mock-up of the 2 main ribs that hold the retracts. These retracts are a tight fit.

Here is a pic of the mocked-up wing retract area -...

Dang - I got sidetracked again! http://rccanucks.com/showthread.php?2819-Magnetic-Building-Board-Bench-System

Although this will come in handy when I start the fuse!

Another improvement - Magnetic Building Board/Bench:

20650

I've started another thread about this here -http://rccanucks.com/showthread.php?2819-Magnetic-Building-Board-Bench-System

Hoping...